Kelly Drive Bushings Parts – Roller Assemblies & Components
Slips: Rotary, Drill Collar, Casing (“VARCO” and “BASSH ROSS” and "Woolley" 4-1/2" B Long equivalents)
Slip Parts: SD, DU, DCS, C-1, and “WOOLLEY” Types A & B
Manual Drill Pipe Tongs:  Type C, B, HT-65, and HT-100 - API Spec 7K
Safety Clamps & Parts: Type “A-MP” & Type “T” & “C”.
Manual Tubing Tongs & Parts: K20, K-25, K-30, K-50, & K-70.
Manual Tubing Spider & Parts: 3-1/2”, 4-1/2”, & 5-1/2” “TS-100”. 
Master Casing Bushings: “MPCH” 37-1/2” & “MSPC” 27-1/2” f/ NATIONAL, OILWELL, GARDNER-DENVER, & CONTINENTAL EMSCO Rotary Tables
API Bowls, Spiders, & Insert Bowls: 8-5/8” API Bowl; 200-Ton Hinged Casing Spider & Reducing Bushings; API Insert Bowls - No. 1, 2, & 3;
Casing Bushings: Type “CB” & “CUL”.
Hydraulic & Pneumatic Tubing Spiders: 55 ton & 125 ton; AOT Dual Spider & Parts. 
Elevators & Parts:

• Slip Type – MYT-40, YT-75, HYT-150, & HYC-200 Elevator & LYT-20 & YC-75 Parts Only;
• Center Latch Type – TA-65, TA-100, MAA-175, & MRA-150;
• Bottleneck Type – MG-100, RG-150, MGG-250, GG-350, & HGG-500;
• Single Joint Type – 2-3/8” – 20”; 
• Side Door Type – SLX-50 3-1/2” – 14-1/4” & SLX-150 5-1/2” – 20” 

Stabbing Guide & Parts: Tubing, Casing, & Drill Pipe
Casing Scrapers & Parts: “BEST” Type BC & BA
“Back-Saver” – Pneumatic Operated Rotary Slip Actuator & Accessories
Tong Dies & Slip Inserts – For “BJ”, “BAASH-ROSS, CAVINS, VARCO
Manual Rotary Tongs – Type “HT-100” (SDD); Type “HT-65” (DB); Type B; Type C  
Kelly Spinners:Type A6C Pneumatic & Type A6H Hydraulic, Type B7 Pneumatic & Type B7H Hydraulic
PHANTOM MOUSE Rotating Mousehole Tool – To Make up and Set back Stands of Drill Collars & Pipe W/O Use of Rotary Table
TWISTER Torque Tool – Hydraulic Operated Torque Tool f/ Makeup and Breakout of Drill Pipe and Drill Collars
INTERNATIONAL TWISTER SPIN Model TS-2000 - Hydraulic Operated Torque Tool w/ Pneumatic or Hydraulic Operated Roller Type Drill Pipe Spinner or Can Be Adapted For An Existing Drill Pipe Spinner (in most instances)
Hydraulic Power Unit – 30HP EXP Electric
5-Ton Spring Hanger – Single Joint Elevators

ADVANCED DRILLER MONITORING SYSTEM (ADMS)
AOI SATELLITE SYSTEM
ANCHOR WINCH HOUSES AND CUSTOM DRILLERS' HOUSE
PMMS-1000 PNEUMATIC MUD MONITORING SYSTEM
INTEGRATED DRILLING SYSTEMS/CONSOLES
WEIGHT INDICATORS: anchor,deflection, midget, single line
BULK TANK SYSTEMS
DUAL TEST CIRCULAR RECORDERS
TON MILE INDICATOR SYSTEMS
DEADLINE ANCHORS: Hercules, National, and inserts
MUD PUMP PRESSURE INDICATOR SYSTEMS, REMOTE: Single pointer, compound pointer
PISTON SEPERATOR
PRESSURE DEBOOSTER
MUD PUMP PRESSURE INDICATOR SYSTEMS, UNITIZED AND STANDPIPE
TORQUE INDICATORS: tongs torque systems, tension load cells
TACHOMETER SYSTEMS
MECHANICAL ROTARY TORQUE SYSTEM: gauge, idler,sprocket
PUMP STROKE COUNTER / RATE METER
CLOSED CIRCUIT TV (CCTV) SYSTEM
CRANE LOAD AND RADIUS INDICATOR SYSTEMS
AOI AUTO DRILLER
DRILLING RECORDERS
DRIFT INDICATOR SYSTEM

Chains & Connecting Links: Spinning & Cathead
Choke Nipples (Solid & Ceramic Inserted) & Jet Nipples
Derrick Pins & Safety Pins
Hose Hobbles
Mud Hoppers & Venturi Tubes
Pivot Type & Bottom Type Mud Guns
Clean-out Gates
Mud Tank Unions
Deadline Stabilizer
Drill Pipe Strainers
Mud Tank Valves: “PATCO” Suction Valves, Dump Valves, & Equalizer Valves.

Spinning Wrenches: Model SSW-10; Model SSW-30; & Model SSW-40
Roller Kelly Bushings & Parts – Pin & Square Drive: Types HDP; HDS; XHDP; MDP; MDS; 4KRVS; 4KRBM
Master Bushings & Insert Bowls – Solid, Hinged, & Split: Types MPCH; MSPC; MSP/MDSP; MSS; & MBSS
Casing Bowls: Type CU; CUL; & CB
Rotary Slips & Parts: Type SDS; SDML; & SDXL
Drill Collar Slips & Parts: Type DCS Multi-Segment
Casing Slips: Type CMS-XL & CP-S
Safety Clamps & Parts: Type MP
“Reconditioned” Power Tools: Model PS-15 & PS-16 Slips & Parts; Iron Roughneck & Parts; Model 6600 & 6800 Kelly Spinner & Parts; Model TW-60 Torque Wrench & Parts

Production Blowout Preventers: Type LP, 1500-PSI WP; Type HP6, 3000-PSI WP; Type LP-15, 2000-PSI WP. *Sizes 1-1/2" NU to 7" API Casing; Manually, Hydraulic/Pneumatic, or Coil Spring Operated. **LP-15 Rams Interchangeable w/ RATIGAN, etc.
Flapper Valve: Type "R" Spring Loaded Roller/Flapper.
Pollution Control Stuffing Box: Type PC, 3000-PSI WP; Integrated Type PC/R. Leak Sensor w/ Polished Rod Lubricator; Polished Rod Lubricator; Leak Catcher.
Slim Hole/Dual Completed Production Equipment: Type SHD Dual Pack Stuffing Box; Type SHS Single Pack Stuffing Box; Type SWT Swivel Flow Tee; BOP.
Pumping Stack: Unitized Assy. w/ BOP, Flow Tee, Stuffing Box, & Lubricator.
Rod Guides: Fluted Wrap Around Nylon Design; Rubber Snap-on Type.
Packers: Concentric, Standard, & Gas Line Type.
Wireline BOPs: Type HP6, 3000-PSI WP; Type HP10, 5000-PSI WP; Type HP15, 10000-PSI WP Manually or Hydraulically Operated; Well Service or Wireline Operations; Sizes 2" EU to 7" API Casing.
Hydraulic Oil Savers: Type 410, 3000-PSI WP; Type C, CL, or CT f/ Slick or Electric Line; Type MT f/ Swabbing.
Sucker Rod Strippers: Type 2WR f/ All Rod Sizes; Type 3WR f/ All Rod Sizes & 1", 1-1/4", & 1-1/2" Tubing/Pipe.
Miscellaneous: Type H Oil Saver Rubbers; Nylon Flagging Material; Hydraulic Hand Pump & Hoses, Custom Molded Rubber Products

Shakers
Mud Agitators
Desanders/Desilters
Degassers

EXPANDING GATE VALVES: EZY-TURN #12, EZY-TURN #22,
EZY-TURN HIGH TEMP
PLUG AND BALL VALVES: EZY-TURN #3, EZY-TURN #5, EZY-TURN #6, 
EZY-TURN #7
INJECTABLE PACKING AND PENETRANTS: EZY-PAK #100, EZY-PAK #115, 
EZY- PACK #120

SPECIALTY PRODUCTS:
RUST-GUARD, C-PLATE, EASY-CLEAN RIG WASH , MOLY-MIST, JET -LUBE 5000, 
JET -LOK II, JET -LOK III

INDUSTRIAL PRODUCTS:
ANTI-SEIZE COMPOUNDS: KOPR-KOTE, NIKAL, 550, SS-30
EP GREASES: EP BEARING, SUPER-LITH, MOLY-LITH, WHITE LITHIUM, JET -PLEX EP,
TEMP-GUARD, CC LUBE, SILICONE, KET-LUBE 33
THREAD SEALANTS: V-2, TFW, TF-25, TF-15
PENETRANTS AND COATINGS: 769, MOLY-MIST, RUST GUARD, Z-PLATE, TERMINAL, TOP GUN
CLEANERS AND DEGREASERS: CLEAN-UP, JET -LUBE 5000, EASY-CLEAN RIG WASH
WATER WELL AND HDD DRILLING: KOPR-KOTE, JET -LUBE 21, JLS, Z-50, J-75, J-89, KOV’R-KOTE

Mud Testing Equipment: Mud Balances & Parts; Viscosity Funnels; Measuring Cups; Water Loss Press & Parts; pH Strips; Half Area Press & Parts; Test Kits; Viscometers; Rheometers; GARRETT Gas Trains; Mixers; Roller Ovens; Aging Cells; Complete Laboratories; Chemicals; Accessories & Parts.
Cement Testing Equipment

Gate Valves & Parts: Model “72” Mud Type Gate Valve – 2”, 3”, 4”, & 5” Sizes – 2000, 3000, 5000 & 7500-PSI WP - Threaded; Butt-Weld; Flanged; Union; or Combinations of Connections Available; Standard, Sour Gas Service & Trims.
Pressure Relief Valve: Type “PRV” Shear Relief  - 2” 500 to 10,000-PSI WP & 3” 500 to 5000-PSI WP.
Type "RR" Reset Relief - 2” & 3” 1500 to 8000-PSI WP; Threaded; Flanged; Union; or Combinations of Connections Available; Standard, Salt Water, or Sour Gas Service Type
Rubber Products: Packing Elements & Seal Kits f/ Annular Bops; BOP Replacement Rubbers; Rotating Heads; Replacement Diaphragm & Kits f/ HYDRIL & MATTCO K20 & K10 Dampeners; Balancing Straps & Tong Pull Back Assembly; Pipe Wipers; Kelly Wipers
Pressure Gauges: Model “6” 1000 to 20,000-PSI WP (Also offered in kPa & Bar Units of Measure) – 2” Male LPT w/ 1” Female LPT, Flanged, or Union Connections Model “7” 1000 to 6000-PSI WP (Also offered in kPa & Bar Units of Measure) – 2” Female LPT Connection, Model “8” 1000 to 20,000-PSI WP, Dual Face Pressure Readings in PSI / kg/cm2, kPa / PSI, or Bar / PSI – 2” Male LPT w/ 1” Female LPT, Flanged, or Union Connections *Gauges offered in Standard, Salt Water, or Sour gas/Oil Services.  
Rig Hardware:High Pressure Full Flow Manifold Fittings - 2”, 3”, 4”, & 5” Sizes, 3000, 5000 & 7500-PSI WP; Wireline Guides & Parts (G-10); Wireline Turnback Assemblies (G-20).; Mud Guards (MG-600 & MG-800) & Oil Guards (MG-500); Chain Connectors; Impact Box End Wrenches.  
OTECO Connector: High Pressure Connector System (“GRAYLOC” Type)  
Mud Pump Expendables: Triplex & Duplex Liners; Liner Packing; Crosshead Head Extension Rods; Hammer-Up Lug Nuts; Premium Pistons & Replacement Rubbers; Urethane Pistons; Premium Pistons Rods & Rod Clamps; Piston Rod Packing; Premium Valves & Valve Seats; Full Opening Valves & Valve Seats; Valve Seat Pullers Valve Cover & Cylinder Head Gaskets.
Swivel Expendables:Washpipe & Washpipe Packing

T&P, FOSTER & BJ Type Tubing & Sucker Rod Tongs & Parts
T&P, FOSTER, KELCO, & TEXAS WESTERN Type Spinning & Make-up Cat-heads & Parts
“New Manufacture and Rebuilt”

High PSI Weld Fittings & Flanges
Triplex Fluid-end Modules
Fabrication of Mud Manifolds & Piping
Hammer Unions and Swivel Joints (Kemper)

Complete Drilling Rigs; Drawworks; Block/Hooks; Rotary Tables & Rotary Transmissions; Mud Pumps & Pump Packages. Drill String & Casing Handling Tools – Casing Power Tongs, Hydraulic Power Units, Elevator/Spiders, & Elevator Links.

FLOAT VALVES –
Model F Plunger Type
Model FC Automatic Fill Plunger Type
Model G Full Open Flapper Type
Model GA Ported Flapper Type
Model GC Automatic Fill Flapper Type
Model GCA Automatic Fill Ported Type
Model GB Air Drilling Flapper Type
Model GBA Air Drilling Ported Flapper Type

BAFFLE PLATES - Ring & Spider types
FLOAT VALVE PULLER ASSEMBLY

“MUD LINE” GATE VALVES -
2”, 3”, 4”, & 5” Sizes – 2000, 3000, 5000 & 7500-PSI WP - Threaded; Butt-Weld; Flanged; Standard & Sour Gas Service Trims.

FLUID END EXPENDABLES -
Valves and seats (3-web, 4-web, and full-opening);
Mechanical and hydraulic valve seat pullers;
Replaceable and Bonded pistons (Rubber & Urethane);
Piston rods (Triplex & Duplex);
Valve cover, cylinder head & liner gaskets;
Pump Liners - Triplex & Duplex

“MUD HOG” CENTRIFUGAL PUMPS -
1.8CP (1-7/8”) & 2.5CP (2-1/2”) shaft sizes, completely interchangeable with major brand centrifugal pumps.
All pump assemblies hydrostatically tested to 375 psig @ no additional cost. Unitized skid packages available in Vertical & Horizontal configurations.

“BAKERLOK” thread-locking compound